2017 Manitex 2277 S

Externally mounted, double-reduction planetary gearbox driven by hydraulic motor. Maximum swing speed 1.5 rpm. Spring-applied hydraulically-released Parking Brake. Ball-bearing swing circle with external gear. Continuous rotation is standard. Manitex ACCUSwing control allows operator to adjust crane swing speed up to a maximum of 1.5 rpm (nominal).

Out-and-down style outriggers, operated independently for precise leveling. Fully extended, intermediate extension and fully retracted positions. 12 (305 mm) diameter floats. Bubble level located near outrigger controls.

Lower frame is mounted to chassis by threaded rods and clamp plates. No welding, drilling, or bolting to truck frame is required.

Single operator platform and seat mounted to turret. Four pilot operated single-axis crane controls provide precise metering and multifunction capability. Swing is further refined using Manitex ACCUSwing control to allow setting to individual operator preference. Controls are arranged in accordance with ANSI B30.5 standards. The operator station also includes engine start/stop, air foot throttle, signal horn, load moment indicator display, boom angle indicator, load chart and range diagram. Enclosed cab optional, heater and air conditioner options also available.

A 3-section pump direct-mounted to power take-off on truck transmission provides 32 gpm (123 lpm) to the hoist, 21 gpm (78 lpm) to the boom hoist and telescope circuit, and 10 gpm (38 lpm) to the swing and outrigger circuit. 70-gallon (265 liter) baffled hydraulic reservoir with strainer and 25-micron filter in the return line. Ball-type shutoff valve and strainer are provided in suction line. Use of SAE O-ring and face seal O-ring hydraulic fittings throughout system

• Self-Lubricating Slider Pads

• Continuous Rotation

• Retracted, Intermediate and Fully

• Extended Outrigger Charts are Standard

• Pilot Operated Controls

• 2-Speed Planetary Hoist with Grooved

• Drum and Negative Draft Flange

• Load Moment Indicator features Digital

• Display, CAN Bus Interface and Internal

• Radio Load Cell Option

• Rugged Weatherproof Electrical

• System with Circuit Status LEDs

• System Pressure Gauge