2017 Terex Cedarapids CRS620S

The revolutionary Terex Cedarapids CRS620S screen plant features the next generation, patent pending LJ-TSV screen. The new screen increases production and handles applications not possible with traditional horizontal screens because it combines the legendary El-Jay high g-force oval stroke motion with adjustable slope operation. This plant can handle larger deck loads and larger screen openings. Screen openings up to 6 (152mm) are possible. Hydraulics quickly change the screen slope in 2.5 increments up to a maximum of 7.5 to best fit the application. Patent pending slant spring screen suspension provides stability at all slopes

• LJ-TSV6203-32 heavy-duty "slant spring" triple-shaft El-JayTM oval stroke screen

• Patent-pending slant spring suspension for 0 to 7.5 slope operation

• Adjustable screen stroke angle and stroke length

• 5/16" (8 mm) thick side plates & beam to beam braced decks

• Patent-pending low maintenance surge dampers/ship braces

• Patent-pending replaceable seal strips allow 4' or 5' (1219 mm or 1524 mm) wire cloth lengths

• Patented triple-shaft lubrication system

• QuickLube connections for TOPS 2.0 filter system

• Pivoting screen support frame adjusts from 0 to 7.5 slope

• Hydraulic lift in 2.5 increments with tool-less ratchet support

• Patented low maintenance 40 hp flex shaft screen drive

• No drive belt whip or tension idler

• No drive belt pull affecting screen movement

• Drive folds for travel without shaft disassembly

• Extra-wide walkways on both sides and feed end of screen

• Non-skid surfaces can be shovel cleaned

• Spring-return safety gates and ladders on both sides

• Heavy-duty roll-away blending chutes for screen cloth access

• 3/8" (9.5 mm) AR400 steel construction

• Four section (25%) blending gates for all decks

• Combine decks: top-center, center-bottom, bottom-fines

• Rugged heavy-duty conveyor systems

• Inclined 48" (1219 mm) 7.5 hp (5.6 kW) fines conveyor with extended discharge clearance and primary style belt wiper

• Dual 30" (9762 mm) reversible 7.5 hp (5.6 kW) cross conveyors extend up to 42" (1067 mm) beyond main frame

• 3-ply belts with vulcanized belt splices

• Cema C class troughing idlers and rubber disk return idlers

• Class II shaft mount gear boxes and TEFC motors

• Belt centering side roller guides

• Easy access belt take-up (end pull on cross conveyors)

• Heavy-duty I-beam main frame

• Tandem axle 25,000 lb (11340 kg) leaf spring suspension

• Air brakes with spring applied emergency brakes

• Lights and splash guards

• Eight 295/75 R22.5 tires and two crank-style landing jacks

• Clamp bar stowage racks on feed end of screen walkway